CẢM BIẾN ÁP SUẤT CONVUM - JAPAN

• Đầu và cảm biến riêng biệt • Loại tách rời cho phép bạn điều chỉnh và duy trì áp suất chân không, áp suất dương và áp suất hỗn hợp ở nơi dễ nhìn thấy. • Phản ứng nhanh • Tiết kiệm không gian • Nó rộng 10 mm. • Thông số kỹ thuật cổng áp lực dồi dào • Có bốn loại phụ kiện đẩy M5, φ4, 6.

Phát hiện chính xác cao về chênh lệch áp suất nhẹ 3 dải áp suất V chênh lệch áp suất -101 đến 0 kPa D áp suất chênh lệch nhẹ -2.0 đến 2.0 kPa E Áp suất chênh lệch cực nhẹ -1000 đến 0.0 Pa Màn hình LCD ba màu dễ đọc

• Pressure switch,blow-off valve can be mounted afterwards • Solenoid valve for vacuum generation mounted • Blow-off valve It automatically blows after vacuum generation stops

• Vacuum switch Small size,high-accuracy • High-speed response time: 2msec • With anlog output (1-5V) • Hysteresis variable type • Can be mounted on several CONVUM ejectors Easy sensor replacement

• Vacuum switch • Small size,high-accuracy High-speed response time: 2msec • Can be mounted on several CONVUM ejectors Easy sensor replacement

• Wiring savings Only 1 cable of 4 lead wires to the PLC. No need to connect solenoid valves cables. Energy saving circuit integarted Air consumption reduction: MVS-201 sensor controls the solenoid valves and turn on the vacuum generation only when minimum vacuum degree pressure vaule is reached. • Easy settings Only 3 key for value settings

• Number of wires are reduced Control vacuum solenoid valve and blow-off solenoid valve by one signal. • Compact,lightweight Size： 61×25×16mm⇒50×20×9.8mm Weight： 20g⇒9g Volume： 1/2 *Compared to MVS-201 • Standard analog output Analog： DC1～5V

• Wire savings Sensor heads are connected to the display. Only one wire (display) is connected to the PLC. • High speed response • Space saving 10mm width • 4 types of pressure port M5 (male,female),φ4,φ6,

• Wire savings Sensor heads are connected to the display. Only one wire (display) is connected to the PLC. • High speed response • 1,4 channels option • CE marking

• Wire savings Sensor heads are connected to the display. Only one wire (display) is connected to the PLC. • High speed response • 1,4 channels option • CE marking

• Battery type, life around 1year (Operation 5times/day) • Easy to see with digital display • Back light in standard • Power saving mode • Ingress protection (range) IP65, dust-proof and water-proof

• Flexible combination can select The pressure can controled by 3-colors • Up, down simple setting • 10% energy concumption can be reduced compared to previous model (MPS-34 seriers) • connector type, easy to install

• Easy checking with 2 colors display Output switch ON / OFF display changes color according to the operation. 4 patterns settings. • Wide pressure range,-0.1 ~ 1.0MPa Vacuum pressure type: -101.3 kPa,Positive pressure: -0.1 ~ 1MP a Compound pressure: － 101 ~ 500kPa • Easy settings Use UP and DOWN keys to set the value. Automatic settings mode available. • Standard switch output and analog output Switch output (open collector) Analog output (1 ~ 5V)

• Wide pressure range,-0.1 ~ 1.0MPa "Vacuum pressure type: -101.3 kPa,Positive pressure: -0.1 ~ 1MPa Compound pressure: － 101 ~ 500kPa" • Easy settings Use UP and DOWN keys to set the value. Automatic settings mode available. • Standard switch output and analog output Switch output (open collector) Analog output (1 ~ 5V)

• Space savings 10mm width • Easy settings 3 keys keys • High speed response time

• Micro-differential pressure type cqn detect ±0.5% F.S. • Easy setting Use UP and DOWN keys to set value • Quick response Response time 2ms