Danh mục sản phẩm
Online support
Mr. Hải - 0985.288.164
Mr. Hải - 0985.288.164
SPARE PARTS
statistical
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
COMPACT AIR CYLINDER WITH CLAMPING CARTRIDGE FESTO - USA
Feed separator HPVS - FESTO
• Version with one plunger
• With non-rotating piston rod
• Proximity sensor SME/SMT-8 can be integrated in the housing
0985-288-164
194 lượt
Feed separator HPV - FESTO
• Version with two plungers
• With twin piston, non-rotating piston rod, and locking mechanism
• Cost-effective: replaces at least two actuators in the feed process
• Proximity sensor SME/SMT-8 can be integrated in the housing
0985-288-164
212 lượt
Angled gripper HGWM - FESTO
The micro gripper for the smallest installation spaces in sizes 8 and 12 with a gripping torque of 11 ... 38 Ncm. Mounting either via clamping flange or external thread.
• Micro gripper: compact, handy design
• Mounting options with clamping spigot, with flange mounting, with Z stroke compensation
• Versatile thanks to externally adaptable gripper fingers
0985-288-164
203 lượt
Radial gripper HGRT - FESTO
• Secure gripping thanks to precise, polished plain-bearing guides
• Gripping force backup via compression springs holds the gripped • workpiece securely in the event of pressure failure
• Compression spring also boosts the gripping force for applications involving heavier loads
• Optimum cycle times thanks to freely adjustable opening angle up to a maximum of 90° per gripper finger. This prevents the possibility of collisions due to the gripper jaws opening too wide
0985-288-164
209 lượt
Parallel gripper HGPT - FESTO
Rugged T-slot gripper for demanding tasks. Exterior and interior gripping possible.
• Sturdy and powerful
• With T-slot guide
• Suitable for external and internal gripping
• Gripper jaw guide protected by sealing air against dust
• High-force variant available
0985-288-164
195 lượt
Parallel gripper HGPP - FESTO
Absolutely precise: high-precision pneumatic gripper with gripper jaw guide.
• High-precision gripper jaw guide
• Suitable for external and internal gripping
• Very flexible thanks to versatile attachment, mounting, and application options
0985-288-164
202 lượt
Parallel gripper HGPP - FESTO
Absolutely precise: high-precision pneumatic gripper with gripper jaw guide.
• High-precision gripper jaw guide
• Suitable for external and internal gripping
• Very flexible thanks to versatile attachment, mounting, and application options
0985-288-164
200 lượt
Parallel gripper HGPM - FESTO
Micro gripper for smallest installation spaces in small and handy designs. With flange or clamping flange.
• Micro gripper: compact, handy design
• Versatile thanks to externally adaptable gripper fingers
• Mounting options with clamping spigot, with flange mounting, with Z stroke compensation
0985-288-164
191 lượt
Parallel gripper HGPL - FESTO
Robust long-stroke gripper for components of different sizes with two parallel and mutually opposing pistons.
• Space-saving, high forces and torques
• Controlled, precise, and centered gripping
• Long stroke: long guide length for the gripper jaws
• Suitable for external and internal gripping
• Opening stroke can be adjusted to optimize time
0985-288-164
198 lượt
Parallel gripper HGPD - FESTO
For rough environments: a fully sealed pneumatic gripper. Exterior and interior gripping possible.
• Ideal for very harsh environments
• Precise gripping even at high torque load
• Max. gripping force with optimum installation space/force ratio
• 8 sizes with up to 40 mm total stroke
• Repetition accuracy of 0 … 0.05 mm
0985-288-164
222 lượt
Parallel gripper HGP - FESTO
• Double-acting piston actuator
• High gripping force with compact size
• Self-centering
• Suitable for external and internal gripping
• With protective dust cap for use in dusty environments (protection class IP54)
• Max. repetition accuracy
• Internal fixed throttling
• Versatile thanks to externally adaptable gripper fingers
• Wide range of options for mounting on actuator units
0985-288-164
214 lượt
Three-point gripper HGDT - FESTO
Rugged T-slot gripper for demanding tasks. Exterior and interior gripping possible.
• Synchronous movement of the gripper jaws
• With T-slot guide
• Suitable for external and internal gripping
• Gripper jaw guide protected by sealing air against dust
• High-force variant available
0985-288-164
198 lượt
Swivel/gripper unit HGDS - FESTO
Compact combination of gripper and rotary actuator for flexible swivel/gripping tasks.
• Combination of parallel gripper and swivel module
• Swivel angle infinitely adjustable
• Precise end stop with elastic cushioning or integrated shock absorber
0985-288-164
237 lượt
Three-point gripper HGDD - FESTO
For rough environments: a fully sealed gripper. Exterior and interior gripping possible.
• Precise gripping with centric movements despite high torque loads
• Ideal for very harsh environments
• 5 sizes with up to 12 mm stroke/jaw
• Repetition accuracy of 0 … 0.05 mm
0985-288-164
201 lượt
Clamping module EV - FESTO
For clamp strokes against a stop. With pressure chamber fitted with diaphragm.
• Compact rodless cylinder with diaphragm
• Single-acting, with reset function
• Flat design
• Hermetically sealed
• Pressure plates and foot mounting as accessories
0985-288-164
197 lượt
Parallel gripper EHPS - FESTO
For use without external controller: the electric gripper EHPS. Low noise level.
• Electric version of the pneumatically actuated parallel gripper DHPS
• Ideal for use as a front-end actuator thanks to its low dead weight
• Controller-free actuation using digital signals
• Adjustable gripping force (4 settings)
0985-288-164
198 lượt
Stopper cylinder EFSD - FESTO
• Fast and simple set-up of transfer systems without compressed air
• For stopping conveyed goods weighing between 0.25 kg and 100 kg
• Status and error messages for visual error diagnostics
• Controlled via digital I/O of a higher-level controller, e.g. terminal CPX, makes commissioning easier
• Mounting interface for ease of mounting on transfer systems
• Adjustable cushioning power
0985-288-164
194 lượt
Hinge cylinder DW - FESTO
Ideal for clamping components in welding processes: the round cylinder DW in an articulated design. Joint yoke on the bearing cap.
For clamping of components during the welding process
• Double-acting
• Easy to mount thanks to the swivel bearing on the bearing cap
• Integrated throttling
• Integrated end-position cushioning
• Rod wiper seal to protect against welding spatter
• Asian automotive standard for car body production
0985-288-164
193 lượt
ISO cylinder with clamping cartridge DSBC-C - FESTO
• Piston rod can be held in any position
• Piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure, or leaks in the system
• Mounting hole pattern to ISO 15552
• Piston rod with internal or external thread
• Magnetic piston for position sensing
0985-288-164
207 lượt
ISO cylinder DSBC - FESTO
• ISO 15552 (ISO 6431, VDMA 24562)
• Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed
• Standard profile with two sensor slots
• Wide range of variants for customized applications
• Comprehensive range of mounting accessories for just about every type of installation
• Magnetic piston for position sensing
0985-288-164
194 lượt
Cylinder with clamping unit DNCKE - FESTO
• Piston rod can be held and braked in any position
• Variant DNCKE-...-S approved for use in safety-oriented parts of control systems
• Mounting hole pattern to ISO 15552
• External piston rod thread
• Static holding force: up to 8000 N
• Magnetic piston for position sensing
0985-288-164
194 lượt
Radial gripper DHRS - FESTO
The cost-effective standard gripper with high gripping force up to 725 Nm handles most applications effortlessly. In many sizes, with position detection, optional gripping force backup, and high torque load included.
• Lateral gripper jaw support for high torque loads
• Self-centering
• Gripper jaw centering options
• Max. repetition accuracy
0985-288-164
181 lượt
Angled gripper DHWS - FESTO
Equipped for a wide range of applications: The standard gripper DHWS ensures a high gripping force. Slotted guide for exterior and interior gripping.
• Improved gripper jaw guide
• Slotted guide
• Internal fixed throttling, does away with the need for external throttling in 90% of applications
• Max. repetition accuracy
• Wide range of options for mounting on actuator units
0985-288-164
191 lượt
Parallel gripper DHPS - FESTO
The oval piston gives this standardized gripper a powerful grip—in many application scenarios.
• Heavy-duty, precision T-slot guide for gripper jaws
• High gripping force with compact size
• Max. repetition accuracy
• Wide range of options for mounting on actuator units
0985-288-164
177 lượt
Bellows gripper DHEB - FESTO
• 11 sizes for gripping diameter from 8 to 85 mm
• Direction of movement: bellows upwards or downwards
• Different bellows materials: EPDM or silicone
• Air connection on the side or from above
• Optimized process sequence with increased quality: prevents the workpieces from being scratched
• Additional reliability: optional sensing via proximity or position sensor
• For gentle internal gripping of delicate workpieces
0985-288-164
181 lượt
Three-point gripper DHDS - FESTO
Versatile in application: standard gripper DHDS with high gripping force.
• Heavy-duty, precision T-slot guide for gripper jaws
• High gripping force with compact size
• Max. repetition accuracy
• Wide range of options for mounting on actuator units
0985-288-164
177 lượt
Stopper cylinders STAF - FESTO
Stopper cylinder in rocker arm design with rebound protection and separating stop function.
• Roller version, toggle lever design
• Absorption of high lateral forces
• Direct mounting of solenoid valves on flange plat
0985-288-164
165 lượt
Stopper cylinder DFST - FESTO
• Toggle lever design
• Built-in, adjustable pneumatic shock absorber for smooth and adapted stopping
• Up to 800 kg impact load
• For position sensing on the piston
• Adjustable active direction thanks to rotatable toggle lever arrangement (90°, 180°, 270°)
• Lever locking mechanism
• Toggle lever deactivator
• Roller version made from polyamide or steel
0985-288-164
179 lượt
Stopper cylinder DFSP - FESTO
Standard stopper cylinder in trunnion or roller version.
• Trunnion version with/without internal thread, with/without protection against rotation
• Roller version with protection against rotation
• Compact design
• Sensor slots on 3 sides
• Long service life thanks to very good cushioning characteristics and sturdy piston rod guide
• Safe stopping of workpiece carriers, pallets, and packages weighing up to 90 kg
0985-288-164
189 lượt
Swing clamp cylinder CLR - FESTO
A combination of linear cylinder and swivel unit in one housing. The clamping finger is also available with a removable rubber cap as an accessory to protect sensitive surfaces.
• Swiveling and clamping in one step
• Adjustable swivel direction
• Clamping fingers as accessories
• With optional dust and welding spatter protection
• Double-acting
• Magnetic piston for position sensing
0985-288-164
173 lượt
Compact air cylinder with clamping cartridge ADN-KP - FESTO
• Piston rod can be held in any position
• The piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure in the system, or loss of pressure
• Mounting hole pattern to ISO 21287
• Piston rod with internal or external thread
• Magnetic piston for position sensing
0985-288-164
162 lượt
