・Compact with large volume
VQC4000: Can drive cylinders up to 160
VQC5000: Can drive cylinders up to 180
・Power saving: Power consumption 0.4 W (Low power type)
・IP67 enclosure
・Compact with large volume
VQC4000: Can drive cylinders up to 160
VQC5000: Can drive cylinders up to 180
・Power saving: Power consumption 0.4 W (Low power type)
・IP67 enclosure
・IP67 enclosure
・Flexible adaptability, such as adding stations and changing specifications, is possible with the use of multi-pin connector manifolds.
・Many common wiring methods are available.
・Dual 4-position 3-port valve
・VV5QC11, VV5QC21
・IP67 enclosure
・Flexible adaptability, such as adding stations and changing specifications, is possible with the use of multi-pin connector manifolds.
・Many common wiring methods are available.
・Dual 4-position 3-port valve
・VV5QC11, VV5QC21
・Compact with a large flow capacity
Installation volume: 42% reduction, Installation area: 26% reduction
VQ4000: Can drive cylinders up to ø160
VQ5000: Can drive cylinders up to ø180
・Power saving: Power consumption of 0.4 W (Low wattage type)
・Compact with a large flow capacity
Installation volume: 42% reduction, Installation area: 26% reduction
VQ4000: Can drive cylinders up to ø160
VQ5000: Can drive cylinders up to ø180
・Power saving: Power consumption of 0.4 W (Low wattage type)
• Immersion type for 6" size header tank
• Service life: 10 million cycles or more
• High peak pressure and reduced low air consumption
• Port size: 1", Orifice size: 40mm
• Fluid temperature: -5 to 60°C. Operating pressure up to 1.6 MPa
• Pilot pressure 0.25 to 0.7 MPa
• No lubrication required
• Port size: 3/8 to 1 inch
• Orifice diameter: 2mm
• Power-saving circuit available
• 2 port N.C. or N.O. types; 3 port Universal type
• Diaphragm choice of EPDM, FKM or Kalrez®
• Wetted part material: PEEK (body/plate
• Orifice diameter: 1.6mm
• Power-saving circuit available as standard
• Choose standard or high-pressure type
• 2 port N.C. or N.O. types; 3 port Universal type
• Diaphragm choice of EPDM, FKM or Kalrez®
• Wetted part material: PEEK (body/plate)
• Orifice diameter: 1.5mm
• Available with power-saving circuit that reduces holding power consumption to 1W
• Diaphragm choice of EPDM, FKM or Kalrez®
• Fluid contact material: PEEK
• Orifice diameter of LVM11: 1.5mm
• Orifice diameter of LVM10: 1.4mm
• Available with power-saving circuit that reduces holding power consumption to 1W
• 2 port N.C. or N.O. types; 3 port Universal type
• Diaphragm choice of EPDM, FKM or Kalrez®
• Wetted part material: PEEK or PFA (body/plate)
• Available with power-saving circuit that reduces holding power consumption to 0.9W
• 2 port N.C. or N.O. types; 3 port Universal type
• Diaphragm choice of EPDM, FKM or Kalrez®
• Wetted part material: PEEK (body/plate)
• Orifice diameter: 0.8mm
• Available with power-saving circuit that reduces holding power consumption to 0.8W
• Diaphragm choice of EPDM, FKM or Kalrez®
• Fluid contact material: PEEK
• For steam (can also be used with air and water)
• Low pressure loss due to angle seat structure
• Low leakage of 10 cm3/min or less (rubber seal)
• Long service life: 3 million cycles (steam) 5 million cycles (air)
• Body material: stainless steel 316L equivalent, bronze (CAC)
• For use with steam
• Long service life: 3 million cycles
• Double guide rings to improve air filtration
• Reduced power consumption compared to previous version
• Port size 1/4 to 1 inch
• IP65 Enclosure