Specialty Cylinders SMC - JAPAN

・Capable of air cylinder multipoint positioning and control ・Fast response and high positioning repeatability 　Positioning repeatability: ±0.5 mm ・Easier maintenance due to unitization ・Built-in self-diagnosis function (LED lamp and signal output) ・Emergency stop of the piston when the air or power supply is cut

・Equipped with an intermediate stop mechanism ・Two-stage strokes are possible with just 　a minute extension.

・Provides 10 to 20 times the energy absorption capacity of general 　purpose cylinders (CG1 series) ・Smooth cushioning from high-speed operation (3000 mm/s) with 　light loads to low/medium-speed operation with heavy loads ・XC93: With greater water resistance + a stable lubrication function 　5 times stronger against water (liquids) than the standard model 　(RHC series)

・Covers a range of driving speeds and output controls not 　possible with standard cylinders thanks to its metal 　seal structure with minimal sliding resistance

・Reduces adhesion/quick extension ・Smooth operation is possible even at 0.5 mm/s. 　(1 mm/s for ø16 or smaller) ・The minimum operating pressure has been reduced by half. 　(Compared to the previous version) ・Improved functions (The new structure is equivalent to 　the standard models.) ・Interchangeable with the standard models ・With auto switch (CDJ2X-Z series: CDJ2X-Z, CDM2X-Z series: CDM2X, 　CDQSX series: CDQSX, CDQ2X series: CDQ2X, CDUX series: CDUX)

・Reduces adhesion/quick extension ・Smooth operation is possible even at 0.5 mm/s. 　(1 mm/s for ø16 or smaller) ・The minimum operating pressure has been reduced by half. 　(Compared to the previous version) ・Improved functions (The new structure is equivalent to 　the standard models.) ・Interchangeable with the standard models ・With auto switch (CDJ2X-Z series: CDJ2X-Z, CDM2X-Z series: CDM2X, 　CDQSX series: CDQSX, CDQ2X series: CDQ2X, CDUX series: CDUX)

Reduces stick-slip in a low-speed range Stable operation is possible even at a low speed of 5 mm/s. (Measurement based on JIS B 8377) Low sliding is possible even in bi-directional operations. Lightweight/Improved functions (The new structure is equivalent to the standard models.) Interchangeable with the standard models With auto switch (CDJ2Y-Z series: CDJ2Y, CDM2Y-Z series: CDM2Y-Z, CDG1Y-Z series: CDG1Y, MDBY-Z series: MDBY, CDA2Y-Z series: CDA2Y, CDS2Y series: CDS2Y, CDQSY series: CDQSY, CD

Reduces stick-slip in a low-speed range Stable operation is possible even at a low speed of 5 mm/s. (Measurement based on JIS B 8377) Low sliding is possible even in bi-directional operations. Lightweight/Improved functions (The new structure is equivalent to the standard models.) Interchangeable with the standard models With auto switch (CDJ2Y-Z series: CDJ2Y, CDM2Y-Z series: CDM2Y-Z, CDG1Y-Z series: CDG1Y, MDBY-Z series: MDBY, CDA2Y-Z series: CDA2Y, CDS2Y series: CDS2Y, CDQSY series: CDQSY, CD

・Allows the high-speed transfer of a workpiece which must 　avoid shock/impact

・Allows the high-speed transfer of a workpiece which must 　avoid shock/impact ・Maximum speed: 600 mm/s

・Allows the high-speed transfer of a workpiece which must 　avoid shock/impact ・Maximum speed: 300 mm/s