PRESSURE SENSORS SMC - JAPAN

・Body sensor: New PFA, tube: Super PFA ・Low-particle generation, excellent flow-through characteristics ・4-channel Flow Monitor 　4 independent flow rate ranges can be monitored by a single controller.

・Integrated type and separate monitor type are available. ・Switch output, accumulated pulse output, analog output ・Capable of switching back and forth between cumulative and instantaneous flow ・Compatible to high temperatures up to 90℃ ・IP65 ・4-channel Flow Monitor 　4 independent flow rate ranges can be monitored by a single controller.

・Applicable fluid: Water, water-soluble coolants ・Compact and lightweight 　56 mm x 40 mm x 90 mm (H x W x D) 　Weight: 340 g (In the case of LFE1□3) ・Pressure loss: 0.02 MPa or less ・Close proximity setting allows for space saving. ・Backflow can be detected ・Fluid temperature: 0 to 85℃ ・Current consumption: 45 mA

・Applicable fluid: Deionized water and chemical liquids, etc ・3-color/2-screen display ・IP65 compliant, non-grease type ・Fluid temperature : 0 to 70℃ ・PVC pipe O.D.: 25A, 30A

・3-color/2-screen display ・Integrated temperature sensor ・40% smaller than existing product ・IP65 compliant, non-grease type ・Fluid temperature : 0 to 90℃ ・PVC piping type : Applicable to deionized water and chemical liquids, etc ・IO-Link Compatible

・Applicable fluid: Water, Ethylene glycol aqueous solution ・Space saving 　Footprint Max. 85% reduction 　Weight Max. 65% reduction ・Needs no piping: Work-hour for installation Max. 45% reduction ・IO-Link Compatible ・3-color/2-screen display ・Fluid temperature: 0 to 90℃

・Applicable fluid: Water, Ethylene glycol aqueous solution ・Lightweight: Max. 53% reduction(40 L/min, With temperature sensor) ・IO-Link Compatible ・3-color/2-screen display ・Compatible with the temperature sensor & flow adjustment valve ・Fluid temperature: 0 to 90℃

・Integrated type and separate monitor type are available. ・Switch output, accumulated pulse output, analog output ・Capable of switching back and forth between cumulative and instantaneous 　flow ・IP65 ・4-channel Flow Monitor 　4 independent flow rate ranges can be monitored by a single controller.

・Adsorption confirmation of minute workpieces ・Repeatability: ± 2% F.S. or less ・Response speed: 5 ms or less, withstand pressure: 500 kPa ・Grease-free, RoHS compatible ・Covers total range with one voltage monitor ・Related equipment: Suction filter series ZFC050

・Can measure up to 12,000 L/min! ・While checking the measured value, settings are possible. ・Current consumption 25 mA or less ・NPN/PNP Switch Function ・Input Range Selection (for Pressure/Flow rate) ・Simple 3-Step Setting

・Applicable fluid Air, N2 ・Flow range: Max. 12000 L/min ・Flow ratio 100:1 　Wide range of flow measurement with one product ・Improved drainage and resistance to foreign matter ・Pressure loss: 75% reduction (20 kPa / 5 kPa) ・Through bore construction ・IO-Link compatible

・Dry air, N2 ・3-color/ 2-screen display ・Expanded flow range: Wide range of flow measurement with one product ・Compact, Space saving

・Dry air, N2 ・Grease-free ・Flow adjustment valve is integrated. ・Compact, Space saving

・Dry air, N2, Ar, CO2 ・Grease-free ・Integrated flow adjustment valve ・Compact, lightweight, space-saving

・Dry air, N2, Ar, CO2 ・Wide range of flow measurement with one product 　Flow ratio 100:1, Smallest settable increment: 0.01 L/min ・Improved drainage and resistance to foreign matter ・Compact, Lightweight　Weight: 27.3% reduction (55 g→40 g) ・Low current consumption: 35 mA or less ・Grease-free

・Automatically adjusts the flow rate. ・Flow rate control accuracy　±5% F.S. ・Response time　10 s or less ・Grease-free

・Used as a general relaying device when water stoppage or water volume 　reduction occurs during the use of a cooling water system, etc. ・Piping sizes ranges from 3/4B to 6B. ・Equivalent to IP42 and IP44

・Used as a general relaying device when water stoppage or water volume 　reduction occurs during the use of a cooling water system, etc. ・With neon light

・A pressure switch function has been added to the gauge

・Can be integrated with ZM ejector system

・For general fluids. ・Equivalent to IP44. ・With neon light.

・Can be used for micro load, around 10 mA e.g. ・With neon light

・16% lighter, 11% smaller (Compared with IS1000) ・Service life: 5 million cycles ・Can be connected to modular type F.R.L. units.

・It is possible to change the settings while checking the measured value. ・Visualization of Settings ・NPN/PNP Switch Function ・Input Range Selection (for Pressure/Flow rate) ・Simple 3-Step Setting

・Applicable sensors: PSE53□, 54□, 550, 56□ ・Compatible with voltage input and current input ・Response time: 1 ms ・Space-saving, capable of vertical and horizontal contact mounting ・Panel mounting, Bracket mounting, DIN rail mounting

・Compatible with 5 types of pressure sensor 　Applicable SMC pressure sensor: PSE53□, PSE54□, PSE550, PSE57□, PSE56□ ・It is possible to change the settings while checking the measured value. ・NPN/PNP Switch Function ・Input Range Selection (for Pressure/Flow rate) ・Simple 3-Step Setting

・Four sensors can be connected. ・Applicable sensors: PSE53□, 54□, 56□ ・Capable of controlling various different applications from one controller ・4 inputs, 5 outputs

・Up to 4 pressure sensors can be connected! 　Centralized Control Saves Installation Space. 　A Single Monitor Various Applications ・It is possible to change the settings while checking the measured value. ・IO-Link

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Withstand voltage: 500 VAC ・Enclosure: IP65 ・Materials of parts in contact with fluid 　Piping port: C3604 + Nickel plating 　Pressure sensor: Al2O3 (Alumina 96%) 　O-ring: FKM + Grease (PSE570/573/574) 　Square ring: FKM (PSE575/576/577)

・Wetted parts: Stainless steel 316L ・IP65 ・Suitable for a wide variety of fluids ・Analog output (voltage/current) ・Low leakage. Face seal, Compression fittings can be selected

・Wetted parts: Stainless steel 316L ・IP65 ・Suitable for a wide variety of fluids ・Analog output (voltage/current) ・Low leakage. Face seal, Compression fittings can be selected