Position sensors FESTO - GERMANY

• Very compact design makes the unit especially well suited to work with pneumatic grippers, compact air cylinders and any application that needs to be performed in a tight space • Measuring principle: magnetic Hall • Suitable for T-slot • LED status indications • Suitable for use with energy chain and robot lines • Cable length 0.3, 2.5 m

• Only for use with Festo Motion Terminal VTEM • Measuring principle: magnetic Hall • Can be inserted into the slot from above, secured with screw • Suitable for use with energy chain and robot lines • LED status indications • Cable length 0.3 m

Position sensors matched to Festo pneumatic grippers of types HGD, HGPP, HGR and HGW and their locating slots. • Measuring principle: magnetic Hall • 3 gripper positions can be detected using an evaluation unit • Freely selectable switching points

• Conductive plastic potentiometer • Absolute measurement with high resolution • High travel speed and long service life • Plug-in connections

• Connecting rod potentiometer • Absolute measurement with high resolution • Long service life • IP65 Rating • Plug-in connections

Measuring principle: magnetostrictive Contactless with absolute measurement • High travel speed • System product for servopneumatic positioning technology and Soft • Stop • IP65 Rating

The universal transmitter solution. With three options for signal evaluation: classic, analog, programmable switching output, or programmable IO-Link® output. The sensing ranges of the transmitter are perfectly coordinated to the standard strokes of Festo cylinders. Measuring principle: magnetic Hall • Can be inserted into the slot from above, secured with screw Suitable for use with energy chain and robot lines • LED status indications • Cable length 0.3 m • Programmable IO-Link®/switching

Ideal for all applications where space is restricted: The position transmitter SMAT is as small as a proximity sensor. This compact design opens up new fields of application. The position of the piston is reported in the form of an analog voltage signal. • Measuring principle: magnetic Hall • Suitable for use with energy chain and robot lines • LED status indications • Cable length 0.3, 2.5, 5 m

Created for the rotary actuators DRVS and DSM, the position sensor SRBS-Q1/Q12 can be screwed quickly onto the actuators as a sealed and encapsulated unit in clean design. You can program the switching points quickly at the push of a button, and you're done! Used to detect rotation of the shaft on rotary actuators DRVS and DSM • The sensor can be quickly assembled without having to manually search for switching points • Simple and reliable operation using just one pushbutton directly on the devi