VACUUM PAD VMECA SERIES VB

• Retaining force (↑): 70.0 Kg @ -60 kPa • Volume: 650 cm³ • Diameter: 155 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Force kept: (↑): 35.0 Kg @ -60 kPa • Volume: 310 cm³ • Diameter: 115 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Retaining force (↑): 35,00 Kg @ -60 kPa • Volume: 310 cm³ • Diameter: 115 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Holding force (↑): 17.04 Kg @ -60 kPa • Volume: 110 cm³ • Diameter: 78 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 17.04 Kg @ -60 kPa • Volume: 110 cm³ • Diameter: 78 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 6.63 Kg @ -60 kPa • Volume: 32 cm³ • Diameter: 53 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Holding force (↑): 3.97 Kg @ -60 kPa • Volume: 15.0 cm³ • Diameter: 43 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Holding force (↑): 2.24 Kg @ -60 kPa • Volume: 10.0 cm³ • Diameter: 34 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 1.0 Kg @ -60 kPa • Volume: 2.70 cm³ • Diameter: 22 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 0.80 Kg @ -60 kPa • Volume: 1.50 cm³ • Diameter: 18.5 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 0.60 Kg @ -60 kPa • Volume: 1.10 cm³ • Diameter: 15.5 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 0.41 Kg @ -60 kPa • Volume: 0.59 cm³ • Diameter: 12 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 0.34 Kg @ -60 kPa • Volume: 0.48 cm³ • Diameter: 11 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Lifting force (↑): 0.16 Kg @ -60 kPa • Volume: 0.15 cm³ • Diameter: 8.8 mm • Good in areas with slightly curved surfaces. • The blowing cup is very good at compensating for a degree of difference in degree and curvature of the workpiece. Application: • Cards • Veneer panels • Packaging materials • Plastic plates • Thin film

• Good in areas with slightly curved surfaces. • The bellows cup is very good at compensating for a degree of difference in level and curvature of the workpiece.

• Good in areas with slightly curved surfaces. • The bellows cup is very good at compensating for a degree of difference in level and curvature of the workpiece.