Pressure and vacuum sensors FESTO - GERMANY

• Sensor versions: piezoresistive pressure sensor or metal thin-film pressure sensor • Measured variable: relative pressure • Operating medium: liquid media and gaseous media • Seal-free: pressure measuring cell and interfaces in stainless steel • Protection: IP67

Relative pressure or vacuum transmitter. For optional manifold assembly using a wall bracket. • Piezoresistive pressure sensor • Measured variable: relative pressure • Cable length 2.5 m • Compact: 8-bracket wall mount for manifold assembly

• For liquid and gaseous media • Quick and easy adjustment of the switching outputs using three pushbuttons • Optimal legibility: display housing rotatable 320°, display at an angle of 45°

• Electronic pressure sensor with piezoresistive pressure measuring cell, integrated signal processing, numeric pressure gauge in percent, operating key and a switching output, PNP/NPN switchable • Display of minimum and maximum readings • All parameters entered can be transferred to other SPAEs (replicator function) • Communication interface IO-Link®

• Five pressure measuring ranges • Measurement of relative or differential pressure or two independent pressure inputs • Switching output 2x PNP or 2x NPN • Numerical and graphical pressure gauge • Mounting: via H-rail, via wall/surface bracket, front panel mounting, with through-holes • Certification: C-Tick, ATEX, c UL us Listed (OL)

Screw-in vacuum pressure switch with permanently set switching point. • Pressure sensor with permanently set switching point • For solenoid valve VSVA • Mounting: screw-in

PEN-M5 8625 • Pneumatic/electric differential pressure switch • Pneumatic/electric pressure transducer • Design for vacuum

Pressure or vacuum indicator with permanently set switching point. • Pneumatic/electric differential pressure switch • Pneumatic/electric pressure transducer • Design for vacuum • Mounting on mounting frame 2N • Splash-proof design • Certification: CCC

• For monitoring compressed air and non-corrosive gases With or without display • Transfer of the pressure value as switch signal, analog signal, or via • IO-Link® to the connected control system • Maximum versatility thanks to a wide range of pneumatic adaptations and switchable electrical outputs

Adjustable pressure indicator or vacuum indicator in sturdy cast aluminum housing with plug to EN 175301-803 or EN 60947-5-2. • Mechanical pressure and vacuum switch • Adjustable switching point • Mounting: screw-in, via through-holes or via H-rail • Visual scale for pressure adjustment • Certification: CCC, c UL us - Recognized (OL), RCM Mark

• For monitoring compressed air and non-corrosive gases • For network monitoring, regulator monitoring, leak test, object detection • Relative method of measurement based on a piezoresistive measuring cell • Serial communication integrated using IO-Link® 1.1 • Compact design 30 x 30 mm • High-contrast display with blue backlight

Optimal price in a modular system: the vacuum pressure switch SDE5, the low-cost alternative for simple and fast pressure control. Impressive detection of compressed air, control points, and vacuum, as well as object detection via back pressure. • Programmable and configurable pressure switch for simple pressure sensing tasks • Threshold/window comparator • Switching point adjustment by teach-in function • Integrated microprocessor • Switching status indicated by an LED visible from all sides